Packard Bell Recovery Iso File

Create a Packard Bell recovery and master CD by burning the contents of the hidden tattoo partition into a CD. Assembler Packard Bell has established a protection system to prevent re-use of OS and driver software on other systems by a hidden tattoo partition on the hard drive that contains a copy of the operating system and device drivers of hardware. If there are problems in burning the hidden partition on the CD, it is possible to retrieve the master CD by paying on the hotline or through some forums. It is important to own a Packard Bell recovery and master CD to restore the Windows system to its original state. • • • To prevent its software being installed on multiple machines, Microsoft requires assemblers such as Packard Bell to use a protection system, called 'Tattoo' in order to safeguard its software. These PCs are shipped without an installation CD but with a copy of the operating system and drivers saved on a hidden partition, allowing you to restore the system to its original state with this 'Tattoo' backup.

The reason of safeguarding the hidden partition Most of these PCs are equipped with a digital watermark located in both the BIOS and the boot track of the hard disk. If it is altered, erased or damaged, the disk cannot boot because the BIOS will not recognize the tattoo on this disc drive. This also means that you will need to tattoo any new hard drive you want to install on your machine, else it will not be recognized by the BIOS. If you lose the tattoo, you risk losing all your software and drivers permanently. It is therefore important to make a backup before formatting the hard drive. How to re-tattoo? If you haven't got a copy of the master CD, there are generic CDs you can get hold of that may help.

USB, short for Universal Serial Bus, is an industry standard that defines cables, connectors and communications protocols for connection, communication, and power.

Contacting your manufacturer may be useful. These generic CDs may not solve your problems completely, in which case you should contact the manufacturer or check the online forums for advice. Linux Be careful installing Linux over a tattooed Windows formatted hard drive as it will destroy the tattoo. The only way around this is to create a Linux boot disk to use.

Hi Guys, You guys may realize me from the Packard Bell Thread. I got a Packard Bell Platinum 1 and replaced the hard drive for a 2GB Compact Flash, the original hard drive was 1.2GB. Now, I tried using my Original Packard Bell Master CD Version: 170580 and the Restore & Recovery Floppy Version 2.2W.

When I put the media into the appropriate drive, and boot the computer; it says 'Insert bootable media into the appropriate drive.' It was supposed to go into the Packard Bell Restore Menu, not say this.

The original owner I got this computer from, said the he used the Master CD and Restore & Recovery Floppy before, but he was not specific on how he used them. I think I might have the wrong Restore & Recovery Floppy.

I might need to get Version 2.3W as said in this thread, I tried a different Master CD for Windows 95 B and it worked and got to the Restore Menu. Only problem is that there is some software on the original Master CD that came with this computer. I have a video link, please take a look and help me out. I never had experienced this before. Thanks Everyone.

Message edited by Anuextreme117. I think I mentioned in a PM that the floppy disk or drive might be bad. Regardless of the disk version it should boot up. I assume that's not happening? You might try a dos bootdisk from someplace like bootdisk.com just to see if it boots OK from a floppy. Also if you take a look at the floppy--the config.sys, autoexec.bat and the files they call and then check the cd files--you might be able to figure out how to start the restore with a different disk. I never used any of those disks. Ch Products Drivers Windows 8 here.

I just accumulated them from various places over the years. The floppies may or may not be the versions that originally came with the restore cd's. Sorry I haven't send the PB sound cards yet. There's 6 or 7 or them I think but I just haven't boxed them up and taken them to the post office. People moved in and rearranged my junk so I've been busy trying to make room.

Don't forget to preorder your Hatch green chili for this fall. Many vendors ship world-wide. Better hurry. They're picking and shipping now. Download Full Movie Bhag Milkha Bhag In 3gp here. Your POST screens simply show the floppy and CD drive are recognized by the BIOS. Have you entered the BIOS (setup) screens and set the boot order to floppy first, CD second, hard drive third?

If the computer is booting to the hard drive first, then that would explain the message you see. BTW, IF you are going to show us the labels on disks, leave them in front of the camera long enough to read the labels. I don't know anything about how Packard Bell worked when Windows 95 was in use, but I am not aware of any recovery disks.

Only the full version of Win95. As riider stated above, you installed starting with a DOS prompt and command line. Then went to the floppy disk to start the process. Why do you insist on using the Pack Bell discs? I'm sure they're loaded with crapware. How about using a retail Win95 CD instead? You can always copy over the crapware afterwards.

Get the Win95C image at the following link. It's in.7z format so you'll need 7-zip or peazip to unpack it. After you unpack it, open the folder to find the win95c_osr25.iso file. You can then burn it to a CD using imgburn or similar software. Download the Win95 boot floppy creator from here: After you've created the disks, make sure you have the HDD installed & the boot order configured correctly in the BIOS, then boot up with both the floppy & CD in the drives. EDIT: if you need a key, look here: message edited by riider. Riider, I do not want to do that method because it will destroy my Compact Flash by running SCANDISK.

I have tried doing this by following this link, It was not good. Also, I followed this video he also has 2 other videos on how he installed the Windows 95 using the Master CD and Floppy. OtheHill, I tried your method, but I forgot to mention that I have Windows 95 installed by using the second Master CD and Floppy in my video. Please check that out.

I also set the boot order but the CF Card booted. I disabled the hard drive in the bios and put the CD ROM first and floppy third, but it still gives me the same message. READ THIS: I THINK I NEED PACKARD BELL RESTORE & RECOVERY DISKETTE 2.3W. IF ANYONE HAS THIS OR THE BCPS NUMBER FOR THIS DISKETTE. PLEASE REPLY! I think I mentioned in a PM that the floppy disk or drive might be bad. Regardless of the disk version it should boot up.

I assume that's not happening? You might try a dos bootdisk from someplace like bootdisk.com just to see if it boots OK from a floppy. Also if you take a look at the floppy--the config.sys, autoexec.bat and the files they call and then check the cd files--you might be able to figure out how to start the restore with a different disk. I never used any of those disks. I just accumulated them from various places over the years. The floppies may or may not be the versions that originally came with the restore cd's. Sorry I haven't send the PB sound cards yet.

There's 6 or 7 or them I think but I just haven't boxed them up and taken them to the post office. People moved in and rearranged my junk so I've been busy trying to make room.

Don't forget to preorder your Hatch green chili for this fall. Many vendors ship world-wide. Better hurry. They're picking and shipping now.